
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a
heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking
surface automatically switches itself off.
• If one or more sensor fields are covered by
objects (a pan, cloths, etc.) for longer than
approx. 10 seconds, a signal sounds and the
cooking surface switches off automatically.
• If all cooking zones are switched off, the
cooking surface automatically switches
itself off after approx. 10 seconds.
Control panel
When the appliance is switched off, if one or
more of the sensor fields on the control panel
are covered for more that 10 seconds, an
acoustic signal sounds. The acoustic signal
switches itself off automatically when the
sensor fields are no longer covered.
Induction cooking zones
• In the event of overheating (e.g. when a pan
boils dry) the cooking zone automatically
switches itself off.
is displayed. Before
being used again, the cooking zone must be
set to 0 and allowed to cool down.
• If cookware that is not suitable is used,
lights up in the display and after 2 minutes
the indicator for the cooking zone switches
itself off.
• If one of the cooking zones is not switched
off after a certain time, or if the heat setting
is not modified, the relevant cooking zone
switches off automatically.
is displayed.
Before being used again, the cooking zone
must be set to 0.
Heat setting Switches off after
, -
6 hours
-
5 hours
4 hours
-
1.5 hours
When the hob is first installed
Warning! Remove all packaging,
both inside and outside the hob
including the advertising labels and any
protective film, before using the hob.
When a cooking zone is switched on,
it may hum briefly. This is a
characteristic of all ceramic glass
cooking zones and does not impair
either the function or the life of the
appliance.
14
Kommentare zu diesen Handbüchern