John Lewis JLFSMC613 Bedienungsanleitung PDF herunterladen (Seite 14)

b) Make sure that the location pegs are in

the slots in the burner body.

c) Let the crown fall freely onto the body.

d) Make sure that you can move the

crown a small distance from side to

side.

2. Put the burner cap centrally on top of the

crown (enamel side up). Move the cap from

side to side and front to back to make sure

that it is correctly installed.

3. Try to light the burner. If the burner does

not ignite, adjust the crown and cap again.

Warning! Do not keep control

knob pressed for more than 15

seconds.

If the burner does not light after

15 seconds, release the control

knob, turn it into off position and

wait for at least 1 minute before

trying to light the burner again.

If the burner accidentally goes out,

turn the control knob to the off

position and try to light the burner

again after minimum 1 minute.

The spark generator can start

automatically when you switch on the

mains, after installation or a power cut.

It is normal.

Turning the burner off

To put the flame out, turn the knob to the

symbol

Warning! Always turn the flame

down or switch it off before you

remove the pans from the

burner.

Lid Safety Device

Lid has safety device, which cut off gas supply for

hob. It works only when lid is closed.

Warning! Always use the control

knob to switch off a burner. Do

not use the lid as a cut-off device.

14 Cooker user manual

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Keine Kommentare

John Lewis JLFSMC613 Bedienungsanleitung Seite 14