John Lewis JLBIGH602 Bedienungsanleitung PDF herunterladen (Seite 18)

Replacement of the connection cable

1. Connect the green and yellow (earth) wire

to the terminal which is marked with the

letter 'E', or the earth symbol

, or

coloured green and yellow.

2. Connect the blue (neutral) wire to the

terminal which is marked with the letter 'N'

or coloured blue.

3. Connect the brown (live) wire to the

terminal which is marked with the letter 'L'.

It must always be connected to the network

phase.

There must be no cut or stray strands of wire

present. The cord clamp must be correctly

attached to the outer sheath.

To replace the connection cable use

only H05V2V2-F T90 or equivalent

type. Make sure that the cable section

is applicable to the voltage load and

the working temperature. The yellow/

green earth wire (B) must be

approximately 2 cm longer than the

live and neutral wire (A).

AB

Warning! A cut off plug inserted

into a 13 amp socket is a serious

safety (shock) hazard. Ensure

that the cut off plug is disposed

of safely.

Important! The replacement of electric

cable must be carried out exclusively by

the service force centre or by personnel

with similar competencies, in accordance

with the current regulations.

Building In

min. 600 mm

min. 55 mm

min. 650 mm

560 mm

480 mm

min. 450 mm

30 mm

10 mm

3 mm

11 mm

11 mm

A

A

B

A) supplied seal

B) supplied brackets

Caution! Install the appliance

only on a worktop with flat

surface.

18 Hob user manual

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare