John Lewis JLBIGGH704 Bedienungsanleitung PDF herunterladen (Seite 11)

5. Touch the Decreasing Control

to select the required

type of gas.

6. After selecting the type of gas, switch off the hob touching

the main ON/OFF Control

7. Touch the main ON/OFF Control

again to reactivate

the hob.

The appliance is automatically set to the normal “User

Mode”.

8. Light all the burners and adjust their flame to minimum,

in order to check the flame stability (visual check).

9. At the same time, check the flame aspect (visual check).

If both the flame stability and the flame aspect are satisfactory,

the setting of the hob for the new gas type is completed.

If the flame stability is not satisfactory, carry out an additional

adjustment as described in the following paragraph.

Setting the hob for the new gas typeSetting the hob for the new gas type

Setting the hob for the new gas type

1. If necessary, activate the hob by touching the main ON/

OFF Control

for about 3 seconds.

2. Touch the Timer Control

repeatedly to select the

auxiliary burner (front left burner) on the burner selection

display .

3. Touch the Increasing Control

and hold the finger on

it until the value 99 appears on the time display. Then,

touch the Decrasing Control

and hold the finger on

it until the value 80 is displayed.

4. Then, touch the Increasing Control

until 83 is

displayed. At this point, the hob is set to the “

Gas ChangeGas Change

Gas Change”

mode and the current gas setting appears on the display:

n0n0

n0 stands for gas G20 (20 mbar)

n1n1

for gas G30 (28-30/37 mbar).

IMPORTANT: setting

n2 n2

n2 does not allow the hob to

function.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

John Lewis JLBIGGH704 Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder John Lewis JLBIGGH704