John Lewis JLBIDW1201 Bedienungsanleitung

JLBIDW 1201DishwasherInstruction manual

Programme Duration(minute)Energy(kWh)Water(litre)50° Economy 130 - 140 1.0 - 1.2 14 - 16Rinse hold 12 0.1 5The consumption values are intendedas a gui

Water hardnessAdjustment of the watersoftenerUse of saltClarke °TH mmol/l manually electronically64 - 88 91 - 125 9.1 - 12.5 2 level 10 yes53 - 63 76

6. Switch off the appliance to confirm theoperation.Filling with saltCaution! Only use salt specificallydesigned for dishwasher use. Allother types of

3. Clean up any rinse aid spilt during fillingwith an absorbent cloth to avoid excessfoaming during the next washingprogramme.4. Close the rinse aid d

For washing in the dishwasher the following cutlery and dishesare not suitable: are of limited suitability:• Cutlery with wooden, horn, china or mothe

The cutlery basketWarning! Knives with long blades,stored in an upright position, are apotential hazard. Long and/or sharpitems of cutlery such as car

Caution! Ensure that the spray armscan rotate freely before you close theappliance door.Adjusting the height ofthe upper basketIf washing very large p

Fill with detergent30201.Press the release button (3) to open thelid (4) of the detergent dispenser.2.Put the detergent in compartment (2).3. If the w

Select and start a washingprogrammeStarting the washingprogramme1. Switch on the appliance. Make sure thatthe appliance is in setting mode.2. Select a

• Water may appear on the sides and thedoor of the appliance as the stainless steelwill eventually become cooler than thedishes.Maintenance and cleani

Important safety informationIt is most important that this instruction book should be retained withthe appliance for future reference. Should the app

D9.Place the coarse filter (A) in the micro-filter (B) and press together.10.Put the coarse filter (B) in place and turnthe handle clockwise to the lo

Moving the applianceIf you have to move the appliance (e.g.moving house):1. Unplug the appliance.2. Turn the water tap off.3. Remove the water inlet a

Malfunction Possible cause Possible solution The connection of the waterinlet hose is not correct.Make sure that the connectionis correct. The water

The washing and drying results are not satisfactory The filters are dirty or notassembled and installedcorrectly.Make sure that the filters areclean

Technical dataDimensions Width 596 mm Height 818 - 878 mm Depth 555 mmWater supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa)Electr

Insert the appliance after the adjustment ofthe appliance level. When inserting theappliance, ensure that the water inlet anddrain hoses are not kinke

max 85 cmmin 40 cmmax 400 cmThe drain hose can face either to the rightor left of the appliance.Ensure the drain hose is not bent orsquashed as this c

Electrical connectionWarning! The manufactureraccepts no liability for failure toobserve the following safetyprecautions.• Safety standards require th

Repairs - after sales serviceYour appliance comes with a three yearwarranty. If it is not working correctly referto "Something not working".

29

For electrical and water connectioncarefully follow the instructions givenin the specific paragraphs.Child safety• Children should not be allowed to t

30

31

John Lewis Partnership171 Victoria StreetLondon SW1E 5NNwww. johnlewis.com156954031-A-462011 (Subject to change without notice)

Maintenance andcleaning• For information on maintenance andcleaning your appliance see the specificchapter in this instruction manual.Service• This pr

ContentsFor the userImportant safety information 2Description of the appliance 6Control panel 7Start/Cancel button 7Washing programmes 9When the

Description of the appliance1. Upper basket2. Water hardness dial3. Salt container4. Detergent dispenser5. Rinse aid dispenser6. Rating plate7. Filter

Control panelThe controls are on the top on thecontrol panel. To operate with thecontrols, keep the appliance doorajar.1. On/off button2. Programme in

Half load buttonThis function is useful and economical whenbaskets are not fully loaded. It decreases theduration of the programme and reduces thecons

Activating the acoustic signals1. To activate the acoustic signals again, dosteps (1) through (4). The programmeindicator (A) goes off and the Endindi